Home > 1960-74 Passenger Car Parts > 1960-1965 B-BODY (intermediate) > Cooling System Parts >

Water Pump Pulley for 1958-1976 MoPar Big-Block w/o AC
PN 1821452 waterpump/fan pulley for 1958-76 Plymouth - Dodge - DeSoto - Chrysler - Imperial - Dodge Trucks with 350-361-383-413-400-426 engines
 
Alternative Views:
Our Price: $66.87


Product Code: 817-426
Qty:

Description OEM Part Number
 
New, stamped steel 6.81" OD waterpump/fan pulley for the following with 350 - 361 - 383 - 413 - 426 (wedge) - 400 - 440 CID engines and without air conditioning: 1958-76 Plymouth Barracuda - Belvedere - 'cuda - Fury - GTX - RoadRunner - Savoy - Satellite - Sport Fury; 1958-76 Dodge Challenger - Charger - Coronet - Dart - Polara - SuperBee - 330 - 440 - 880; 1958-61 DeSoto; 1959-76 Chrysler; 1959-74 Imperial; 1962-76 Dodge Trucks (not for Hemi).

This is an exact replacement of the original equipment and therefore a very deep offset pulley, as per the original. The rear edge of the V-groove will sit very close to the four bolts which fasten the water pump to the water pump housing. If you try to use washers or aftermarket bolts with taller hex heads, the backside of the outer diameter of the pulley groove may slightly scrape the bolt heads. For this reason, it is recommended that you use regular hex bolts without washers for attaching the water pump to the water pump housing, just like the factory did

1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 A-Body B-Body C-Body E-Body